Keith Brooks Keith Brooks's Profile Page

Keith Brooks Keith Brooks

0 Course Enrolled • 0 Course Completed

Biography

HPE7-A06 Reliable Braindumps Ppt - Exam HPE7-A06 Tutorials

If your answer is yes then you need to start Channel Partner Program HPE7-A06 test preparation with HP HPE7-A06 PDF Questions and practice tests. With the CramPDF Channel Partner Program HPE Campus Access Switching Expert Written Exam HPE7-A06 Practice Test questions you can prepare yourself shortly for the final HPE Campus Access Switching Expert Written Exam HPE7-A06 exam.

The HPE7-A06 study materials from our company are compiled by a lot of excellent experts and professors in the field. In order to help all customers pass the exam in a short time, these excellent experts and professors tried their best to design the study version, which is very convenient for a lot of people who are preparing for the HPE7-A06 Exam. You can find all the study materials about the exam by the study version from our company.

>> HPE7-A06 Reliable Braindumps Ppt <<

Free PDF Quiz HP - HPE7-A06 Authoritative Reliable Braindumps Ppt

HP certification HPE7-A06 exams has a pivotal position in the IT industry, and I believe that a lot of IT professionals agree with it. Passing HP certification HPE7-A06 exam has much difficulty and needs to have perfect IT knowledge and experience. Because after all, HP certification HPE7-A06 exam is an authoritative test to inspect examinees' IT professional knowledge. If you have got a HP HPE7-A06 Certification, your IT professional ability will be approved by a lot of IT company. CramPDF also has a pivotal position in IT training industry. Many IT personnels who have passed HP certification HPE7-A06 exam used CramPDF's help to pass the exam. This explains why CramPDF's pertinence training program is very effective. If you use the training material we provide, you can 100% pass the exam.

HPE Campus Access Switching Expert Written Exam Sample Questions (Q21-Q26):

NEW QUESTION # 21
The customer is experiencing periodic uplink congestion between campus-1's AGG-1 and core. This has boon negativelyaffecting voice communications.The VOIP phones edge mark their packets with DSCP EF. The uplink from AGG-1 to core is LAG1.
The customer has already configured the following class and policy on AGG-1:

Based on this policy, which scrip), when deployed on AGG-1. will improve the reliable forwarding of voice trafficbetween AGG-1 and its uplink to the core?

Answer: B

Explanation:
The problem describes uplink congestion affecting VoIP traffic (marked with DSCP EF, value 46) on AGG-
1's LAG1 uplink. The existing configuration classifies this traffic into voip_class and applies voip_policy inbound, setting local-priority 6. To improve reliable forwarding during congestion, VoIP traffic needs strict priority queuing on the egress interface (LAG1).
* Analysis of Options:
* Option A applies a QoS schedule profile globally but doesn't modify the policy's local-priority or apply the schedule profile specifically to the congested LAG.
* Option B modifies voip_policy to set local-priority 7 (mapping DSCP 46 traffic to queue 7) and applies the 8qDwrStrict schedule profile to the egress interface lag 1. In the 8qDwrStrict profile, queue 7 is configured for strict priority, ensuring voice traffic gets precedence over lower-priority traffic during congestion. This aligns with best practices for QoS for VoIP.
* Option C also sets local-priority 7 and applies the schedule profile to lag 1, but the profile itself configures queue 7 with DWRR (Deficit Weighted Round Robin) instead of strict priority, which is less suitable for delay-sensitive voice traffic.
* Option D applies a schedule profile globally and uses DWRR for queue 7.
* Conclusion:Option B is the correct solution because it maps the DSCP EF traffic to the highest local priority (7) and applies a QoS schedule profile to the specific congested uplink (lag 1) that treats queue
7 with strict priority. This ensures voice traffic is prioritized reliably.
References:AOS-CX QoS Guide (specifically sections on Classification, Queuing, Scheduling Profiles, Strict Priority vs. DWRR, applying policies to interfaces/LAGs), DSCP to Queue mapping concepts. This relates to the "Performance Optimization" (6%) and "Connectivity" (9%) objectives.

NEW QUESTION # 22
With the configuration oftwo CX 8325 switches in the VSX cluster, how would you prepare a link- aggregation for a 7000 gateway for a zero-touch provision to support protocol-based port redundancy?

Answer: B

Explanation:
The goal is to configure a Link Aggregation Group (LAG) on a VSX cluster (pair of CX 8325 switches) that connects to an Aruba 7000 series gateway undergoing Zero Touch Provisioning (ZTP). The LAG needs to support "protocol-based port redundancy" (LACP) and allow connectivity during ZTP.
* VSX Requirement:Since the LAG connects to two separate physical switches operating as a VSX pair, the LAG must be configured as a Multi-Chassis LAG (MC-LAG) on the switches. This allows the gateway to form a single LAG across both upstream devices. The command multi-chassis under the interface lag <id> context enables this.
* Protocol Redundancy Requirement:"Protocol-based port redundancy" indicates that Link Aggregation Control Protocol (LACP) should be used to dynamically negotiate and manage the LAG bundle between the switches and the gateway. The command lacp mode active enables LACP in active negotiation mode.
* ZTP Requirement:During ZTP, the gateway might not have its full configuration, including LACP settings, enabled immediately. To ensure the gateway can establish basic IP connectivity for ZTP (e.g., reach Activate/Central via DHCP/DNS), the switch ports should allow traffic even if LACP negotiation hasn't completed. The lacp fallback feature enables this, allowing individual LAG member ports to become active if LACP PDUs are not received from the peer.
* Analyzing the Options:
* A)Configures lacp mode active and lacp fallback butlacksthe multi-chassis command required for VSX.
* B)Correctly configures the LAG as multi-chassis, enables lacp mode active, and enables lacp fallback. This meets all requirements.
* C)Configures multi-chassis but uses potentially older or less standard syntax lacp enable and lacp fail-over instead of lacp mode active and lacp fallback.
* D)Lacks the multi-chassis command and uses potentially older/less standard syntax.
* Conclusion:Option B provides the complete and correct configuration using standard AOS-CX syntax to create an MC-LAG on the VSX pair with LACP enabled for redundancy and LACP fallback enabled to support gateway connectivity during ZTP.
References:AOS-CX VSX Guide (MC-LAG configuration), AOS-CX Link Aggregation Guide (LACP, LACP Fallback commands and usage), ArubaGateway ZTP documentation. This relates to "Network Resiliency and virtualization" (8%), "Switching" (19%), and "Connectivity" (9%) objectives.

NEW QUESTION # 23
A customer hassot a requirement for VLAN 151 to be an isolated VLAN. A colleague has copied and pasted a partialconfiguration, but you do not achieve the desired outcome. This is the code that was added:
What should be added to the configuration before this code to achieve the desired result?

Answer: D

Explanation:
The customer requires VLAN 151 to be configured as an isolated Private VLAN. A partial configuration was added, but the desired outcome wasn't achieved. We need to determine which configuration snippet should be addedbeforethe (unspecified) partial configuration to correctly set up the Private VLAN structure.
* Private VLAN Configuration Fundamentals:
* APrimary VLANmust be defined. This VLAN carries traffic between promiscuous ports and ports in associated secondary VLANs.
* Secondary VLANs(either isolated or community) are associated with the primary VLAN.
* Ports are then mapped to either the primary VLAN (promiscuous ports, typically router/firewall connections) or a secondary VLAN (host ports). Isolated ports within thesameisolated VLAN cannot communicate with each other.
* Analyzing the Options (Assuming VLAN 15 is the intended Primary):
* A)
vlan 15
private-vlan primary
vsx-sync
This correctly defines VLAN 15 as the Primary Private VLAN. The vsx-sync command ensures this configuration is synchronized across a VSX pair (relevant if applicable). This is the necessary prerequisite before defining VLAN 151 as an isolated secondary VLAN and associating it with VLAN 15.
* B)isolated-vlan primary is incorrect syntax. The command is private-vlan primary.
* C)primary-vlan isolated 151 is incorrect syntax for defining either the primary or secondary VLAN type/association within the primary VLAN context.
* D)private-vlan isolated 151 within the vlan 15 context is incorrect syntax. The private-vlan isolated command belongs under the configuration of the secondary VLAN (VLAN 151 in this case).
* Conclusion:Before configuring VLAN 151 as private-vlan isolated and associating it, the primary VLAN must be defined. Option A correctly shows the command (private-vlan primary) under the intended primary VLAN's configuration (vlan 15) to establish it as the primary VLAN.
References:AOS-CX Security Guide (Private VLAN configuration steps and commands). This relates to the
"Switching" (19%) and "Security" (10%) objectives.

NEW QUESTION # 24
A senior engineer from the network operations team has reported an intermittent problem where some PoE- powered devices are randomly losing power. During your investigation, you found that port 1 of the Acc-1 switch is currently presenting the behavior shown in the CLI output for the Acc-1.

What is a probablecausa lot poor 1/1/1 is denying PoE?

A. switch PoE powerbudget exceeded
B. This switch does no! support PoE class 4.
C. PoE was manually disabled for port 1/1/1.
D. PoE port priority sot to low

Answer: A

Explanation:
The question involves intermittent PoE-powered device power loss on port 1/1/1 of an AOS-CX switch (Acc-
1), with CLI output (not provided) indicating a PoE issue. The task is to identify a probable cause.
* Analysis of Options:
* Option A:Incorrect. AOS-CX switches typically support PoE Class 4 (802.3at, 30W), sufficient for most devices.
* Option B:Correct. If the switch's PoE power budget is exceeded, it may deny power to port 1/1
/1, causing intermittent device failures.
* Option C:Incorrect. Low PoE port priority may deprioritize the port but is less likely to cause complete power loss compared to budget issues.
* Option D:Incorrect. Manual disabling of PoE would cause consistent power loss, not intermittent issues.
* Why Option B is Correct:AOS-CX switches have a finite PoE power budget (e.g., 370W or 740W, depending on the model and power supply). If the total power demand from connected devices exceeds this budget, the switch denies power to some ports, often intermittently as devices cycle or negotiate power. For port 1/1/1, this could manifest as random power loss for the connected device. The CLI output likely shows a "power denied" status (e.g., via show power-over-ethernet brief). Checking the PoE budget (show power-over-ethernet) and upgrading power supplies or prioritizing critical ports resolves the issue, aligning with HPE Aruba Networking's PoE troubleshooting guidelines.
* Relevance to Certification Objectives:
* Connectivity (9%):Troubleshooting PoE deployment issues.
* Troubleshooting (10%):Diagnosing power-related issues in campus networks.
* Switching (19%):Implementing PoE configurations for Layer 2 devices.
References:
HPE Aruba Networking AOS-CX Configuration Guide: PoE Configuration and Troubleshooting.
HPE7-A06Study Guide: Covers PoE management and diagnostics.
HPE Aruba Networking Technical Documentation: PoE Budget Troubleshooting.

NEW QUESTION # 25
Exhibit.

A conference venue has a requirement to secure independent network users from each other in their network.
The following configurations are created on Edge-1:

A. change the VLAN 151 primary-vlan 151
B. change the VLAN 151 private-vlan community
C. change the VLAN 152 type. primary-vlan 152
D. change the VLAN 152 private-vlan community

Answer: B

Explanation:
The requirement is to secure independent network users from each other in a conference venue using Edge-1.
This scenario typically calls for Private VLANs,specifically using the 'isolated' type to prevent communication between hosts within the same secondary VLAN.
* Analysis of Options:
* Private VLANs consist of a primary VLAN and one or more secondary VLANs (isolated or community). Isolated ports cannot communicate with other isolated ports in the same VLAN; they can only communicate with promiscuous ports (usually the router uplink). Community ports can communicate with each other and promiscuous ports.
* Option A: Configures VLAN 152 as private-vlan community.
* Option B: Configures VLAN 151 as private-vlan community.
* Option C: Defines VLAN 152 as a primary-vlan associated with itself, which isn't standard syntax
/logic.
* Option D: Defines VLAN 151 as a primary-vlan associated with itself.
* The goal isisolation. None of the options directly configure an isolated VLAN. Options A and B configure community VLANs, which allow communication between users within that VLAN, contradicting the requirement. Options C and D attempt to define primary VLANs in a potentially incorrect way.
* Caveat:There seems to be an issue with the provided options. Standard configuration to make VLAN 151 isolated would involve defining a primary VLAN (e.g., vlan 152 private-vlan primary) and then defining VLAN 151 as isolated (vlan 151 private-vlan isolated). Since none of the options correctly configure anisolatedVLAN, and the requirement is isolation, the question or options are likely flawed. However, if forced to interpret intent, questions sometimes test understanding of thetypesof private VLANs. Changing a VLANtocommunity type (Option B for VLAN 151) is a distinct action, even if it doesn't meet the statedisolationgoal. Without correct options for 'isolated', selecting the 'best' flawed option is difficult. Assuming the question intends to configure VLAN 151 assome typeof private secondary VLAN, Option B modifies VLAN 151's private VLAN characteristic.
* Conclusion:Based on the requirement for isolation, none of the provided options are correct. However, if assuming a potential error in the question or options and needing to select the closest modification related to private VLAN types for VLAN 151, Option B is chosen tentatively, despite configuring
'community' instead of the required 'isolated'.
References:AOS-CX Security Guide (Private VLAN configuration), Private VLAN concepts (Primary, Isolated, Community). This relates to the "Switching" (19%) and "Security" (10%) objectives.

NEW QUESTION # 26
......

However, you should keep in mind that to get success in the HPE Campus Access Switching Expert Written Exam (HPE7-A06) exam is not an easy task. It is a challenging exam and not a traditional exam. But complete HP HPE7-A06 exam preparation can enable you to crack the HP HPE7-A06 exam easily. For the quick and complete HPE Campus Access Switching Expert Written Exam (HPE7-A06) exam preparation you can trust HPE7-A06 exam practice test questions. The HP HPE7-A06 exam practice test questions have already helped many HP HPE7-A06 exam candidates in their preparation and success and you can also trust "CramPDF" exam questions and start preparing today.

Exam HPE7-A06 Tutorials: https://www.crampdf.com/HPE7-A06-exam-prep-dumps.html

HP HPE7-A06 Reliable Braindumps Ppt If you find that our exam practice questions and answers is very different form the actual exam questions and answers and can not help you pass the exam, we will immediately 100% full refund, HP HPE7-A06 Reliable Braindumps Ppt Of course, you can also experience it yourself, HP HPE7-A06 Reliable Braindumps Ppt We provide with candidate so many guarantees that they can purchase our study materials no worries.

If you use only one of these computers, feel free to skip over Exam HPE7-A06 Tutorials to that section unless you have a burning curiosity about how the other half lives, Part II: Application and Database Design.

Features of HP HPE7-A06 Dumps PDF Format

If you find that our exam practice questions and answers is very HPE7-A06 Reliable Exam Questions different form the actual exam questions and answers and can not help you pass the exam, we will immediately 100% full refund.

Of course, you can also experience it yourself, HPE7-A06 We provide with candidate so many guarantees that they can purchase our study materials no worries, When people take the subway staring blankly, you can use Pad or cell phone to see the PDF version of the HPE7-A06 study materials.

All your worries can be wiped out because our HPE7-A06 learning quiz is designed for you.

Keith Brooks Keith Brooks

Biography

Quick Links

Support